Phone-Com_Systems

Communication Accessories
Phone-Com Systems | Waterproof Radio Covers | Deck Horns/Hailers

Phone-Com Systems

The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available:

PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.

PI-10: For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below.
Phone-Com Wiring: Color-coded multi-conductor interconnect wire (22 AWG) is available from NEWMAR at any length desired with 5, 10 or 15 conductors. For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required.
Note: Phones are not waterproof and should be installed in a protected location.

PI-2: Two station phone with single call button; sold individually; 2 lbs.
PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs.
PI-10: Multi-station phone with 10 call buttons, sold individually; 2 lbs.
22 AWG Wire: 5, 10 or 15 conductor; sold per foot.
BUZZER: External buzzer for use in high-noise areas, 1 lb.

(Specify White or Black when ordering)

AQ Series Waterproof Radio Covers

Hand-held radios can be taken anywhere without being damaged by water, dust or sand when the AQ Series waterproof cover is used for protection. Even total immersion will not harm the radio. These covers are certified waterproof to a depth of 33 feet.

The case is made of super-tough, UV resistant PVC, which is engineered with enough flexibility to facilitate easy operation of knobs and keypads. Transparent design allows easy reading of digital displays. Sound is virtually unimpeded and RF transmission is unaffected.

A quick release clip allows easy insertion and removal of the radio and a handy lanyard provides extra security when hands are wet. But if the radio falls into deep water, no problem! Safely inside the AQ case, it will float!
Weight (all models): 1 lb.

Models
AQ-5 Accommodates the vast majority of today’s “mini” mobile phones
AQ-10L/R For compact hand-held radios. New reversible design accommodates both left and right hand antennas; Replaces AQ-10
AQ-20L/R For standard size hand-helds. New reversible design accommodates both left and right hand antennas; Replaces AQ-20L and AQ-20R
AQ-2MXL Larger and longer than AQ-20 for high power radios with large battery packs

Dimensions in inches
A=Overall height of radio/phone with antenna extended
B= Height of radio/phone body
C=Combined width and depth of radio/phone body

Model	A	B	C
AQ-20L/R	15.7"	7.8"	5"
AQ-2MXL	21.2"	10.6"	5.3"
AQ-10L/R	13"	6.1"	4.1"
AQ-5	7.6”	6.7”	5.9”

Deck Horns/Hailers
Clear, distortion free, waterproof deck horns are ideal for shipboard paging, hailing, fog horn and alarm systems. High impact plastic with hook-up wire provided. 8 Ohm. Assembled with stainless steel hardware.

PA-60/40 Heavy Duty Commercial

Model	Output Nominal/Peak	Weight
PA-8W	8 watts / 12 watts	1 lb.
PA-30/20	30 watts / 20 watts	3 lbs.
PA-40/30	40 watts / 30 watts	5 lbs.
PA-60/40	60 watts / 40 watts	8 lbs

Note: Model PA-60/40 is a commercial grade horn which also features excellent sensitivity as a microphone for use in talk-back systems.

Dimensional Drawings
PA-40/30.pdf
PA-30/20.pdf
PA-8W.pdf